HB 130 Parts Washer
HB 130 Parts Washer
- Work Conditions
- Technicial Specifications
- Working Principle of the Machine
- Electrical - Electronic Equipment
The machine should be able to operate smoothly between 0 ° C and + 60 ° C ambient temperature. It shall also operate without any problems under intense damp and dusty working conditions.
|
Machine Outer Dimensions Width/ Lenght / Height |
1300 x 1650 x 1600 mm |
|
Washing Cabinet Internal Dimensions Width/ Lenght / Height |
1230 x 1230 x 750 mm |
|
Washing Basket Dimensions Ø |
1200 mm |
|
Loading Height |
650 mm |
|
Basket Capacity |
600 kg |
|
Pump Pressure |
3,6 bar x 30 ton/hour - 1 piece |
|
Pump Power |
2 hp |
|
Pump / Reductor |
PRC / PRC |
| Total Number of Nozzles |
90 pcs |
|
Heater Power |
15 kw |
|
Electricity (V/phase) |
380 V / 3 |
|
Heat Insulation System |
---------- |
| Cover Safety System |
Standard |
|
Basket Stop System |
---------- |
| Contact System |
Standard |
|
Thermal and Engine Protections |
---------- |
|
Digital Timer |
0-90 min |
|
Digital Thermostat |
0-120 oC |
|
Cover Opening System |
Damper |
|
Body Structure |
AISI Chrome Single Boiler |
|
Tank Volume |
180 lt |
|
Machine Total Weight |
300 kg |
|
Loading Car |
Standard |
- When temperature decrase 5 °C from arranged temperature, digital thermostat will step in automatically and can be increased and decreased by 1% steps .
- Basket is produced in accordance with its turning in the machine.
- Detergent water is sprayyed by means of fixed nozzles at all sides of basket. There are 1 pump and 2 nozzle lines in our machine.
- There are 180 liters of water in washing cabin . Pumps press this water to nozzle line by pulling from washing cabin. There are filters on the place of where pumps absorbing to keep small parts there.
- Hot water is available on water tank inside of machine and is heated by 2 piece of 15 kw resistance.
- Electricity 380 V-50 Hz. 3 phases. Cables are manufactured as normal antigron electrical installation ABN.